Environmental protection
1
Description of symbols
1
Know Your Tool
2
Specifications
2
Operating Instructions
3
Battery & Charging Procedure
3
TSG, Sleep Mode, Activating Tool,
Forward/Reverse, Variable Speed
4
LED worklight, Power Consumption LED
Belt Clip, Temperature & Low voltage cut out, Hex chuck
5
Installing/removing bits, Tightening Torque,
Fastening with Screws
6
Running Nuts and Bolts, General safety instruction
7-12
General Maintenance
12
Parts List
14
CONTENTS
Description of symbols
The rating plate on your tool may show symbols. These represent
important information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Double insulated for additional protection.
Conformance to use the ETL mark
and complies with relevent standards
Conforms to relevant Electrical Stds and
electromagnetic requirements in Australia.
Read the instruction manual
Waste electrical products should not be
disposed of with household waste.
Conforms to relevant legislation and
safety standards.
Conforms to relevant GS Legislation
and safety Stds
Indoor use
MEPS Energy Performance Mark.
Li ion Battery recycle. Do Not dispose
of in house hold waste.
Max.use temperature
Conforms to relevant standards for
electromagnetic compatibility.
Environmental protection
Recycle unwanted materials instead of disposing of
them as waste. All tools, hoses and packaging should
be sorted, taken to the local recycling centre and
disposed of in an environmentally safe way.
This manual covers all T12 Series Impact Drivers but is illustrated
with the 4A/h pack option for illustration purposes only.
T12ID4 Impact Driver
5424
