background image

SHARPENING THE BLADES

Before sharpening, let the blades of the hedge trimmer come to a complete stop; it will make them much easier to 

sharpen if they are not moving. After uninstalling the battery, clamp the blade assembly into a vise. Ensure the main 

body is adequately supported to avoid damage. File down the exposed cutting surface of each blade with an 8 inch 

smooth round file with a diameter of 1/4 to 7/32 of an inch. Make sure to retain the original angle of the cutter teeth 

when filing.

In order to file both sides of each cutter tooth, you may need to momentarily run the hedge trimmer until the op-

posing side of the cutter teeth are exposed. Do not run the hedge while it is locked into the vise. Make sure all tools 

for sharpening have been removed before installing the battery. Remove the battery pack and repeat the sharpening 

process for the newly exposed teeth.

STORAGE AND TRANSPORTATION

Always remove the battery pack and replace the blade cover before storing or transporting the hedge trimmer. Avoid 

the sharp teeth of the blade when doing so. It is highly recommended to clean the hedge trimmer before storing it 

(refer to “Cleaning the Hedge Trimmer”).  Store in a place where the trimmer cannot be easily accessed by children 

or untrustworthy foes.

BATTERY

1. Make sure the battery is fully charged before storage in order to maximize the life of the battery.
2.  Do not store the battery pack on the tool.
3. After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.

CHARGER

1. Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity or onto 

the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not place the charger in 

wet conditions.

2. Unplug the charger when there is no battery in it.

3. Fully charge the battery before placing it in storage.

4. Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger in direct 

sunlight or in damp conditions. Do not charge outside. Recharge at room temperature. If the battery is hot, allow it 

to cool down before recharging.

MAINTENANCE

12

Summary of Contents for 40415

















Reviews: