background image

Operator’s Manual

Electric Start Capable

4-Cycle Gas Trimmer

TB525 EC

TABLE OF CONTENTS

Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Rules for Safe Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Assembly Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Oil and Fuel Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Starting and Stopping Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Operating Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Maintenance and Repair Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cleaning and Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Optional Accessory  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Troubleshooting Chart  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Warranty Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

All information, illustrations, and specifications in this manual are based on
the latest product information available at the time of printing. We reserve
the right to make changes at any time without notice.
Copyright© 2011 MTD SOUTHWEST INC, All Rights Reserved.

DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE
WILL BE REQUIRED FOR WARRANTY SERVICE.

For assistance regarding the assembly, controls, operation or maintenance of
the unit, please call the Customer Support Department at 

1-800-828-5500

in

the United States or 

1-800-668-1238

in Canada. Additional information about

the unit can be found on our website at 

www.troybilt.com

or 

www.troybilt.ca

.

For service, please call the Customer Support Department to obtain a list of
authorized service dealers near you. Service on this unit, both within and after
the warranty period, should only be performed by an authorized and approved
service dealer. When servicing, use only identical replacement parts.

769-07280 P00

10/11

SAVE THESE INSTRUCTIONS

SERVICE INFORMATION

Summary of Contents for TB525

























Reviews: