57
CH12 Logout
Click the Logout item to logout web page.
Appendix A --- System Recovery
WellGate 2880 uses dual firmware image to ensure the system stabilities. In most cases,
you will not encounter the system fail issue. Normally, the user should be able to use
Web page to login and upgrade the firmware through it. If you are not able to do it,
please follow the following steps for recovery.
1.
Start the WellGate 2880 and check the STATUS LED is up or not. If STATUS LED is
ON, please press the reset button for 5 seconds to reset to default. After all LED are
light up, the system is going back to factory settings.
2.
Change your PC IP address to
192.168.123.111
and network set to fix IP address
mode.
3.
Connect your PC to LAN port and use http://192.168.123.123 to upgrade the
firmware. Make sure you are using Microsoft IE 9 or later version.
Do not support
FireFox Web browser or Google Chrome browser.
4.
If you cannot login to the web page through
192.168.123.123
. Open a command
line windows and type “telnet 192.168.123.123”. If you can see the following
display, go to the next step. Otherwise, please contact Welltech FAE for RMA
(Repair).
5.
Prepare a TFTP server for firmware download as follows
-
download tftp server
http://www.welltech.com/support/voip/TFTP/TFTP_Server.zip
or
http://tftpd32.jounin.net/tftpd32_download.html
-
start tftp server