34
4-3 Tone
The setting page is used to setup the tone to be generated or detected. The
detected tone is the Disconnect 1 & 2
(for FXO use)
and the others are for
generating. The
BUSY
tone is also used to release FXO port. So, Busy Tone
work as the 3
rd
set of disconnected tone. The disconnect tone is used to
identify if the PSTN remote user hung up the call in order to release FXO port
from gateway.
Figure 4-3 Tone setting
Please use Country Template to select the country profile which will be applied.
Click “Use” to load those country tone parameters to system and change if it
is necessary.
For those countries are not showed in the list, please select a
closed country and edit to match your country. You can send an email with the
tone definition to Welltech if you would like to put your country’s tone into the
list.
Note:
About
how to record disconnect tone and analyze it
.
Please visit the
following link and download to refer it.
http://www.welltech.com/support/voip2/SIP%20series/FXSO%20series/25x
x/FXO_Tone_Analyzer/FXO%20Tone%20Analyzer_EN.zip