![background image](http://html1.mh-extra.com/html/welltech/lan-phone-101/lan-phone-101_manual_955964017.webp)
LAN Phone 101 User Manual Guide
Document Ver. 1.8b
Copyright (c) 2003 WellTech Computer Corporation
LAN Phone Ver. 114/504(Normal and PPPoE)
16
User has to offer one TFTP/FTP server IP Address and set this IP Address on the
LAN Phone keypad. The IP Address is necessary for upgrading Lan Phone new
application rom file.
(3) Set FTP user account
User has to press user name and password for FTP server login .It is necessary for
upgrading Lan Phone new application rom file in FTP method.
(4) Indicate file name
User has to press the file name of new application rom file prepared for upgrading
(5) Start Download
Press OK to start download new application rom file. After download is finished,
LAN Phone will automatically reboot.
(6) Firmware Version
Show versions of all rom files and hardware.
Note: Download via LCD command can only upgrade new
application
rom file.
4. Hardware Test
LAN Phone 101 provides self-test for all functions buttons. Please follow the
direction from LCD panel to operate and verify it.
5. PPPoE Configuration
(1) PPPoE Mode
Choose ON or OFF to enable or disable PPPoE function.
(2) Username And Password
To set PPPoE connection user name and password.
(3) Retry When Disconnect
Choose ON or OFF to enable or disable this function. If user enable this function,
after PPPoE being disconnected, LAN Phone will automatically reboot to
re-connect, and after reboot, if LAN Phone still can’t get contact with server,
LAN Phone will keep trying to connect. On the other hand, if user disable this
function, LAN Phone won’t reboot and keep trying to connect.
6. Reboot
It is necessary and important for user to reboot it after any configurations has been
made to the LAN Phone 101.
2. User Line Number
User has to identify at least one number for the LAN Phone 101 to register to the
GateKeeper. User can set up to 10 different numbers.
Summary of Contents for LAN PHONE 101
Page 1: ......