LAN Phone 101 User Manual Guide
Document Ver. 1.8b
Copyright (c) 2003 WellTech Computer Corporation
LAN Phone Ver. 114/504(Normal and PPPoE)
29
200 –e164-2 300….
) User can disable one number and the number after this one. Ex. from
set 1-5 is configured, if user set the third number as “x”, from third to fifth number will be
disabled at the mean time. (ex.
h323 –e164-2 x
)
9.
–alias
: identify ID for the LAN Phone 101 to register to the GateKeeper
(h323 –alias
“X”).
.The default alias is related to MAC address of LAN Phone, so each LAN Phone has
different alias.
10.
–tokenpwd
: To set RRQ/ARQ authentication token password.(
h323 –tokenpwd
“password” ; h323 –tokenpwd x
to disable this function
)
(A) LCD menu password:
User can enter LCD system configuration by key in this
password and default value is lowercase “x.” (press TRANSFER to switch lowercase
and uppercase).
(B) H.235 security:
To set RRQ/ARQ authentication token password. If LAN Phone
wants to register to a GateKeeper, which implement H.235 security token feature,
LAN Phone has to set a RRQ/ARQ authentication token password, which is provided
by GateKeeper manager. LAN Phone can’t work normally with this GateKeeper
unless Token Password is set.
11.
–gkdis
: set auto discovery function on or off. If this function is enabled and IP address of
GateKeeper is set as 255.255.255.255, LAN Phone will multicast to search a GateKeeper
on network with configured GateKeeper name(please refer to 6.-
gkname
); if IP address of
GateKeeper is set, before LAN Phone register to the assigned GateKeeper, it will send out
GRQ(GateKeeper Request) message with configured GateKeeper name to GateKeeper
first.
12.
–rtp
: assign RTP port number(1024-65535)
13.
–ttl
:set RAS TTL time(0-3600 second)
14.
–gkfind
: assign GateKeeper finding port number(1024-65535)
15.
–ras
: assign GateKeeper RAS port(1024-65535)
16.
–range
: assign dynamically allocated port range(1500-65535)
17.
–respto
: set max waiting time for first response to a new call. After dial phone No. without
getting response in max waiting time, user will hear busy tone.(1-200 seconds)
18.
–connto
: set max waiting time for call establishment after receiving first response of a new
call (1-20000 seconds).
Note: 1.Items from 9-16 are for advanced user only.
2.In Peer-to-Peer mode,
h323 –print
will only display e164, alias, mode ,
RTP port, and allocated port range.
3.In P2P mode, please dial “#” after press IP address (ex.10.1.1.1 please dial
10*1*1*1#) or e.164 of Phone book (Please refer to chapter 3.9 Pbook
Summary of Contents for LAN PHONE 101
Page 1: ......
