![background image](http://html1.mh-extra.com/html/welltech/lan-phone-101/lan-phone-101_manual_955964041.webp)
LAN Phone 101 User Manual Guide
Document Ver. 1.8b
Copyright (c) 2003 WellTech Computer Corporation
LAN Phone Ver. 114/504(Normal and PPPoE)
40
Step 4. Start configure
Most of all commands displayed in console / telnet are transfer to web interface. The most
important commands are
Network Interface
,
H323 Information
,
Commit Data
and
Reboot System
.
The method is as the same as command mode.
1.Network Interface
Please refer to chapter
3.6 [ifaddr] command.
-
DHCP:
Enable / Disable to DHCP mode
-
IP Address:
Set IP Address
-
Subnet Mask:
Set the Subnet Mask
-
Default gateway:
Set Default routing gateway
-
Domain Name Server:
Set Domain Name Server IP address
-
SNTP:
Enable / Disable the Simple Network Time Protocol
-
SNTP Server Address:
Set SNTP Server Address
-
GMT:
Set time zone for SNTP Server time
-
IP Sharing:
Enable it if behind IP Sharing router
-
IP Sharing Server Address:
Set WAN IP Address of IP Sharing Server router if it is a fixed
one.
-
Management Center IP Address:
Set Management Center Address
Please be noted:
If the WAN IP Address of IP Sharing Server router is not a fixed one, it is not necessary to
input any values.
If behind the dynamic WAN IP Address situation please configure as GK mode and select
Welltech Call Manager as proxy server.
Summary of Contents for LAN PHONE 101
Page 1: ......