www
.
W
elltec
.
pro
39
Open and remove the rear
panel of the device.
(Optional) Place the carbon
filter in the rear panel frame.
Place the HEPA filter in the
rear panel frame and insert the
rear panel into the device.
The filter should be cleaned once a month with a vacuum cleaner (only on the outside,
adjacent to the carbon filter or rear panel grille). Under no circumstances should you use
water as it will permanently damage the HEPA filter.
When operating the dehumidifier in humid rooms, periodically check that the HEPA filter
remains dry. Do not use the HEPA filter while it is wet.
The filter should be checked periodically to prevent excessive dirt or puncture of the filter.
It should be replaced every 6-24 months depending on the degree of wear and
contamination.
After installing the HEPA filter, the air flow is slightly reduced. This can lead to a small
decrease in dehumidification performance and it is a normal process, thus it cannot be
used as a complaint.
Summary of Contents for DHN20
Page 2: ...v 1 05 ...
Page 3: ...www Welltec pro 1 Polski 2 28 English 29 56 ...
Page 59: ......
Page 60: ...www welltec pro store kontakt https welltec pro store kontakt ...