background image

Unless otherwise specified, all commercial cooking 

equipment manufactured by WELLS BLOOMFIELD, LLC is        

warranted against defects in materials and workmanship 

for a period of one year from the date of original installation 

or 18 months from the date of shipment from our factory, 

whichever comes first, and is for the benefit of the original 

purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY 

WARRANTY, EXPRESSED OR IMPLIED IN LAW 

OR IN FACT, INCLUDING BUT NOT LIMITED TO, 

WARRANTIES OF MERCHANTABILITY OR FITNESS 

FOR ANY PARTICULAR PURPOSE, AND/OR FOR 

DIRECT,  INDIRECT OR CONSEQUENTIAL DAMAGES 

INCONNECTION WITH  WELLS  BLOOMFIELD 

PRODUCTS.  This warranty is void if it is determined 

that, upon inspection by an authorized service agency, 

the equipment has been modified, misused, misapplied, 

improperly installed, or damaged in transit or by fire, flood or 

act of God.  It also does not apply if the serial nameplate has 

been removed, or if service is performed by unauthorized 

personnel. The prices charged by Wells Bloomfield for its 

products are based upon the limitations in this warranty.  

Seller’s obligation under this warranty is limited to the 

repair of defects without charge by a Wells Bloomfield 

factory authorized service agency or one of its sub-service 

agencies.  This service will be provided on customer’s 

premises for non-portable models.  Portable models (a 

device with a cord and plug) must be taken or shipped 

to  the closest authorized service agency, transportation 

charges prepaid, for service.  In addition to restrictions 

contained in this warranty, specific limitations are shown in 

the Service Policy and Procedure Guide.  Wells Bloomfield 

authorized service agencies are located in principal cities.  

This warranty is valid in the United States and Canada and 

void elsewhere.  Please consult your classified telephone 

directory, your foodservice equipment dealer or contact:

Wells Bloomfield, LLC

10 Sunnen Dr., St. Louis MO 63143 USA 

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and  ADDITIONAL WARRANTY EXCLUSIONS

NOTE:  For your protection, please note that equipment 

in this shipment was carefully inspected and packaged 

by skilled personnel before leaving the factory.  Upon          

acceptance of this shipment, the transportation company 

assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:

1.  VISIBLE LOSS OR DAMAGE:   Be certain that any 

visible loss or damage is noted on the freight bill or 

express receipt, and that the note of loss or damage is 

signed by the delivery person.

2.  FILE CLAIM FOR DAMAGE IMMEDIATELY: 

 

Regardless of the extent of the damage.

3.  CONCEALED LOSS OR DAMAGE:  if damage is

 

unnoticed until the merchandise is unpacked, notify the  

transportation company or carrier immediately, and file  

“CONCEALED DAMAGE” claim with them.  This  

should be done within fifteen (15) days from the date  

the delivery was made to you.  Be sure to retain the  

container for inspection.

Wells Bloomfield cannot assume liability for damage or loss 

incurred in transit.  We will, however, at your request, supply 

you with the necessary documents to support your claim.

SHIPPING DAMAGE CLAIM PROCEDURE

xi

1.  Resetting of safety thermostats, circuit breakers, over 

load protectors, and/or fuse replacements are 

not 

 

covered by this warranty unless warranted conditions  

are the cause.

2.  All problems due to operation at 

voltages or phase  

other than specified on equipment nameplates

 are  

not 

covered by this warranty.

 

Conversion to correct voltage and/or phase must be  

the customer’s responsibility.

3.  All problems due to 

electrical connections not made  

in accordance with electrical code requirements  

and wiring diagrams 

supplied with the equipment are  

not

 covered by this warranty.

4.   Replacement of items 

subject to normal wear

, to

 

include such items as knobs, light bulbs;  and, normal  

maintenance functions including adjustments of

 

thermostats, adjustment of micro switches and

 

replacement of fuses and indicating lights are 

not

 

covered by warranty.

5.  Damage to electrical cords and/or plug due to exposure 

to excessive heat are 

not 

covered by this warranty.

6.  Full use, care, and maintenance instructions supplied 

with each machine.  Noted maintenance and

 

preventative maintenance items, such as servicing 

and  cleaning schedules, are customer responsibility.  

Those miscellaneous adjustments noted are customer 

responsibility.  Proper attention to preventative 

maintenance and scheduled maintenance procedures 

will prolong the life of the appliance.

7.  Travel mileage is limited to 

sixty (60) miles 

from an   

Authorized Service Agency or one of its sub-service  

agencies.

8.  All labor shall be performed during regular working 

hours.  Overtime premium will be charged to the buyer.

9.  All genuine Wells replacement parts are warranted 

for ninety (90) days from date of purchase on non-

warranty equipment.  This parts warranty is limited only 

to replacement of the defective part(s).  

Any 

use of 

non-genuine  

Wells parts completely 

voids any

 

warranty.

10.  Installation, labor, and job check-outs are 

not 

 

considered  warranty and are thus

 not

 covered by this  

warranty.

11.  Charges incurred by delays, waiting time or operating  

restrictions that hinder the service technician’s ability 

to perform service are 

not

 covered by warranty.  This 

includes institutional and  correctional facilities.

M01

1C.15 2M-308026 Owners Manual for Built-In Five-W

ell 

Auto-Fill Modual W

armers

M01

1C.15 2M-308026 Owners Manual for Built-In Five-W

ell 

Auto-Fill Modual W

armers

Summary of Contents for MOD-500TDMAF





















Reviews: