background image

IMPORTANT:  DO NOT DISCARD THIS MANUAL 

This manual is considered to be part of the appliance and is to be given to the OWNER or 

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of 

this appliance.  Additional manuals are available from your WELLS DEALER. 

 

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR 

INSTALLING THIS APPLIANCE.

  Contact your WELLS DEALER if you have any 

questions concerning installation, operation or maintenance of this equipment. 

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

OWNERS MANUAL 

 

HEAVY DUTY 

GAS GRIDDLE 

w/THERMOSTAT 

 

MODELS 

 

HDTG-2430G 
HDTG-3630G 
HDTG-4830G 
HDTG-6030G

 

Includes 

INSTALLATION 

USE & CARE 

EXPLODED VIEW 

PARTS LIST 

123 

p/n 

2M-307735 

Rev. D 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

           M123   

14

0429 

FOR YOUR SAFETY

 

Do not store gasoline or other flammable liquids 

in the vicinity of this or any other appliance. 

WARNING: 

Improper installation, adjustment, alteration, service or maintenance can cause 
property damage, injury or death.  Read the installation, operating and mainte-
nance instructions thoroughly before installing or servicing this equipment. 

IMPORTANT: 

The purchaser of this equipment must post in a prominent location instructions to be followed in the 
event the user smells gas.  This information shall be obtained by consulting the local gas supplier. 

Model HDTG-2430G 

PRINTED IN CHINA 

Summary of Contents for HDTG-2430G

































Reviews: