manualshive.com logo in svg

Wellion MICRO-PUMP, Manual

Share
Download
Wellion MICRO-PUMP Manual Download Page 85

85

be any combination from the letter “A- F” and the number “0-9”. If you forget your 

password, you can use the Pump Serial number to unlock.

3.  Change Password: 

Use to reset the password.

4.  Restore Factory Settings: 

All settings reset to the factory defaults.

Note:

 Once the factory settings have been restored, all saved settings will be 

lost (except for time). Please make a note of all important settings before 

restoring factory settings.

Note:

 The Bluetooth function requires a microSD 

card to be installed.

Bluetooth

From the General Settings screen, choose Bluetooth 

(Figure 117).

1.  Bluetooth On/Off: 

Check the checkbox to turn on 

Bluetooth. The Bluetooth logo will appear in the 

status bar. More options will appear if Bluetooth is 

on.

2.  Device Name: 

Choose Machine Name to give your 

PDA a unique name. (Figure 118)

3. Visibility: 

Check the checkbox to allow other 

Bluetooth devices to detect the PDA. This function 

will timeout after 120 seconds.

Figure 117

Figure 118

Summary of Contents for MICRO-PUMP

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands