manualshive.com logo in svg

Wellion MICRO-PUMP, Manual

Share
Download
Wellion MICRO-PUMP Manual Download Page 35

35

Editing Basal Programs (Graph Display)

From the Home Screen, press the Basal Function 

Button to enter the Basal Screen, then choose 

the correct Basal Program tab and then rotate 

the PDA to landscape orientation. This will 

activate the Basal Program graph display as 

shown in Figure 35.

Figure 35

Note:

 Before editing the graph display, please 

review the functions of the list display 

to better understand the graph display 

functions.

1.  Reviewing Basal Programs:

The vertical axis of the chart represents the 

basal rate while the horizontal axis represents 

the time, which shows 24 hours of the day.

2.  Add a Basal Time Period

a. 

In the graph display, press and hold on any 

area of the graph to enter the edit mode as in 

Figure 36. The highlighted area is the period 

to be edited.

Figure 36

Note:

 You cannot switch between Basal Programs in Graph Display mode. You 

must return to List Display to change Basal Program.

b. 

By pressing the   buttons, or the touchscreen, you can choose a different basal 

time period.Press   to pop up the Basal Rate Setting window as shown in Figure 

33.

c. 

When finished, press   to save and then   to exit the editor mode.

Summary of Contents for MICRO-PUMP

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands