manualshive.com logo in svg

Wellion MICRO-PUMP, Manual

Share
Download
Wellion MICRO-PUMP Manual Download Page 17

17

Note:  

The help button works in the Home, Basal, Bolus and History screens.

Note:

  Some functions, such as the change reservoir wizard, will not allow you to 

return to the home screen or return to a previous screen before completion.

Power OFF: 

If the display is on, press and hold the power button to open a 

dialogue box to confirm that you would like to turn off the device.

2. 

 (Help Button)

If you need help with commands or functions of the PDA, you can press the help 

button for more information.

3.   (Home Screen Button)

Press this to return to the home screen.

4.   (Back Button)

Press this to return to the previous screen, or close a dialog box.

5.   (Up Button)

This can be used to navigate the interface without using the touchscreen. Choose 

up to change selection.

6.   (Down Button)

This can be used to navigate the interface without using the touchscreen. Choose 

down to change selection.

7.   (Enter (Select) Button)

This can be used to navigate the interface without the touchscreen. Choose the 

Enter button to select an action.

Note:

 The Enter button also can be used for special functions, as explained in 

subsequent chapters.

Summary of Contents for MICRO-PUMP

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands