manualshive.com logo in svg

Wellion MICRO-PUMP, Manual

Share
Download
Wellion MICRO-PUMP Manual Download Page 100

100

4. 

Keep other wireless devices away from the pump and PDA, even if the devices 

comply with national emission requirements. Wireless interference can still 

occur.

If the signal strength between the pump and PDA is good, information will travel 

more quickly between the two. Always observe the wireless signal strength on the 

status bar before using the PDA. If the signal is weak or there is no signal, the PDA 

will not be able communicate with the pump.

Note:

 If the signal is weak or there is no signal, check that you are avoiding the 

above four situations. If the signal is still weak, move the PDA closer to the 

pump. If the situation persists, please contact customer service.

Disposal

When you replace the pump, portable controller and its attachments, please do 

not throw them away. Take them to an electronics recycling facility or return to our 

company.

Do not discard damaged or expired batteries. Please dispose of batteries according 

to local recycling laws.

Transportation

Avoid placing heavy objects on top of the pump and PDA. Avoid direct sunlight and 

rain. Transport according to the transportation conditions.

Storage

If you are temporarily not using the pump system, store the components in a cool, 

dry, clean and well-ventilated area.

If you decide not to use the pump for a prolonged period, the battery should be 

stored separately.

Summary of Contents for MICRO-PUMP

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands