Page 8 of 14
The Automatic operating mode can be selected by pressing the
AUTO/MAN
Control Key.
The light emitting diodes (LED‘s) (13) indicate the related operating state.
Information on the display (1)
Nozzle or
bottom heater symbol
Temperature of the nozzle or
bottom heater (with WHP 3000)
Air flow rate in l/min
Time remaining for the
temperature profile step in sec.
2.3 Setting temperature profile
Select the parameters by pressing the Control Key:
•
TEMP
(7):
Depressed Once
:
Nozzle temperature during the first step
Depressed Twice
Temperature of the bottom heater during the first
step
(only
with
WHP3000)
Repeat
for
Steps
1-3
Symbol for nozzle or bottom heater indicates which temperature is displayed.
•
AIR
(6):
Depressed Once:
Air flow rate in l/min during the first step
Repeat
for
Steps
1-3
•
TIME/
PREHEAT
(5) : Depressed Once:
time remaining in the first step
Repeat
for
Steps
1-3
The active value is marked on the display and can be changed using the
UP / DOWN
(2) /
(3) Control Keys. Keeping the Control Key depressed, rapidly changes the value.
TEMP AIR TIME
210°C 40
l 100s
300°C 25
l 50s
210°C 30
l 15s
step 1
step 2
step 3
Nozzle
Pre-Heater
Nozzle
