Enterprise IP Phone Using the Basic Call Functions
To establish a conference:
1)
Press the Conf hot key during an active call.
2)
Dial the number to conference in, then press the Send hot key
3)
When the call is answered, press the CONF button.
4)
After the CONF is established, initiator can continually add CONF members, press
Add hot key to enter into dial-up interface
，
enter the number
，
press send
button to dial out
，
when the people answer the call , he have been attended to
the CONF.
5)
Initiator can use private chart function to have a private chart with any member,
press PriChat, choose any members in phone member list, and then press
PriChat hot key, both sides enter into private chart mode, if there only 3 CONF
members, both sides begin to private chart and the third party enter a Hold
mode. If the attender is more than 3, and then the other attenders keep on
talking. If you want to end the private chat, press ExitPri hot key.
6)
Initiator can use remove function to remove any CONF members, press remove
hot key, choose any members in phone member list, and then press remove hot
key again.
7)
Initiator Hangs up, the CONF over.
Message
The phone supports SMS (Short Messaging Service) and Voicemail, if you want to
use them, please make sure that your VoIP telephony system supports this
functionalities and your accounts’ message has been enabled.
Voicemail
Your voice mailbox messages, which are usually stored on a media server of your
local or hosted VoIP telephony system, can be accessed from your phone.
New voice messages can be indicated both acoustically and visually as described
below:
The idle screen will indicate the new voice messages coming.
The MESSAGE button will be lighted.
To configure the Voicemail code via Phone interface:
1)
Press Menu->Messages->Voice Mail->Set Voice Mail.
