Enterprise IP Phone Basic Call Functions
60
chart and the third party enter into a Hold mode. If there are more than 3
attender, and then the other attenders keep on talking. If you want to end the
private chat, press
ExitPri
hot key.
6)
Initiator can remove any CONF members, choose any members in phone
member list , and then press
Remove
hot key again.
7)
Initiator Hangs up, the conference is over.
Message
The phone supports SMS (Short Messaging Service) and Voicemail, if you want to
use them, please make sure that your VoIP telephony system supports this
functionalities and your accounts’ message has been enabled.
Voicemail
Voice mailbox messages, which are usually stored on a media server of local or
hosted VoIP telephony system, it can be retrieved from phone.
New voice messages can be indicated both acoustically and visually as described
below:
The idle screen will indicate the new voice messages coming:
The
MESSAGE
button will be lighted.
To configure the Voicemail code via Phone interface:
1)
Press
Menu
->
Messages
->
Voice Mail-
>
Set Voice Mail
.
2)
Use the
navigation keys
to highlight the line for which you want to set, enter
the code which the phone used to connect to your system. Press
123
hot key to
select the proper input method.
3)
Press
Save
to save the change, press
Back
to return to the previous menu.
Note:
Please contact your system administrator for the connecting code. Different systems
have different codes.
To configure Subscribe for MWI via the web interface:
1)
Click on
Account
->
Advanced
->
Subscribe for MWI
.
