WELDY miniwelder geo2, Operating Manual

Page: 14 / 96

14
Transport and storage
Maintenance, service and repairs
• The complete machine should be cleaned, greased and placed in a dry place if it is not used.
• For PVC welding, the adhesions on hot wedge should be cleaned off after each weld.
• Attention: for welding of material such as PVC that produces corrosive gas we recommend to use a
stainless steel hot wedge (optional accessory)
• Repairs should only be carried out by Weldy partners. Restricted to use with original Weldy accessories
and spare parts.
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distributor/seller shall apply. In case of
guarantee or warranty claims any manufacturing or workmanship defects will either be repaired or replaced
by the distributor at its discretion. Warranty or guarantee rights have to be verifi ed by an invoice or a delivery
document. Hot wedge shall be excluded from warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
Weldy AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confi rms that this product, in the version as
brought into circulation through us, fulfi ls the requirements of the following EC directives
Directives: 2006/42
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016)
2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016)
2011/65
Harmonised standards:
EN 12100, EN 55014-1, EN 55014-2, EN 6100-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Kaegiswil, 03.02.2016
Bruno von Wyl, CTO Andreas Kathriner, GM
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly
way.
For EU countries only: Do not dispose of electrical equipment with household refuse!
To protect the device from damage, dirt, dust and moisture, always store and transport unit in the original box.
Conformity
Disposal
The welding wedge (5) must be
cooled down for transport.
Do not store any fl ammable materials in
the transport box