WELDY miniwelder geo2, Operating Manual

Page: 10 / 96

10
Application miniwelder geo2
Application miniwelder tex2
Note: For welding materials made of PVC a special machine
with a steel wedge must be used.
Intended use:
The miniwelder geo2 is designed for overlap welding of thinner
geo membranes made from: LDPE, HDPE, PP, PVC, EVA.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Civil engineering, landfills, expressways, water-proofing
works, reservoirs, artificial lake and pond construction,
production of covers, fish farms, agriculture, biogas reta-
ining bags, etc
.
Options:
Steel pressure rollers with test channel, wedge type GEO, hold-
down rollers, outdoor travel rollers, pressure spring brown.
Note: For welding materials made of PVC a special machine
with a steel wedge must be used.
Intended use:
The miniwelder tex2 is designed for overlap welding of materi-
als made from; textiles and coated textiles and thinner syn-
thetics from 100 microns up made from PE, PP, PVC, EVA.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Production of sealing barriers and covers in agriculture, ponds,
greenhouses, tarpaulins, architecture.
Options:
Silicon rollers without test channel, wedge type TEX, hold
down bar, indoor travel rollers, pressure spring yellow.
Technical data
Voltage V~ 230
Power consumption W 800
Frequency Hz 50/60
Wedge temperature max. °C 480
Emission level LpA (dB) 60
Weight kg 3.5 (tex2), 3.9 (geo2)
Speed m/min 0.2–7.5
Material thickness mm 0.1–1.5 (depending upon material type)
max. 1.0 HDPE
Max. overlap mm 100
Mark of conformity
Protection class I
1
Technical data and specifi cations are subjected to change without prior notice.
12/12/12 mm
30 mm