16
eng
deu
ned
3.1 Scope of delivery
The cleaning set Weldkar Inox 1600 AC/DC is delivered with the accessories of the following table in a grey
and practical transport case.
Description
Specifications
Quantity
Cleaning kit Weldkar Inox 1600 AC/DC
_
1
Ground cable
10 mm / 3 mm
1
Workpiece cable
10 mm / 4 mm
1
Power cable
3 m
1
Teflon handle with quick release buckle
SK25
1
High-quality carbon fibre brush
M10 L
1
Carbon-Fix (Teflon cover)
M10 L
1
Signing-Fix (Telfon clamp for graphite anode with felt)
_
Optional
Graphite anode
90°
Optional
Signing electrolyte
100 ml
Optional
Signing felt
white
Optional
Template
_
Optional
Speed/Special electrolyte
500 ml
1
Copper-ceramic paste
10 ml
1
De-/mounting key
_
1
Bottle (for electrolytes)
_
1
4. Operational
Please observe the safety instructions in the chapter
Safety starting on page 4.
4.1 Putting the device into operation
The correct preparation of the unit is described
described below. The procedures for cleaning, polishing
and cleaning, polishing and signing are described in the
following sections.
1. Unpack the device.
2. Dispose of the packaging material correctly.
Dispose of the packaging material correctly.
3. Place the appliance on a flat surface in your working
area.
4. Insert the grounding cable into the connector (5)
5. Insert the workpiece cable into the connector (4)
6. Insert the power cable into the socket (8).
7. Insert the 230 V plug into a socket.
7.1 The unit is prepared.
8. Do not switch on the machine until you have carried
out the preparations have been made according to
the desired processing: cleaning, polishing or signing.
