CLEANING KIT WELDKAR
INOX 1600 AC/DC
13
WARNING
PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN
AWAY. PACEMAKER WEARERS SHOULD MAINTAIN AN APPROPRIATE DISTANCE UNTIL THEY HAVE
CONSULTED A PHYSICIAN. DO NOT LOSE THE MANUAL. READ THE OPERATING INSTRUCTIONS/
MANUAL BEFORE INSTALLING, USING OR MAINTAINING THE EQUIPMENT.
If the operator does not strictly adhere to the safety rules and take precautions, welding products and processes can cause
serious injury or death or damage other equipment or property.
Safe working methods have been developed based on past experience with cleaning and polishing.
These methods should be learned through study and training before using this equipment. Some of these methods apply
to equipment connected to power lines; others apply to motor-driven equipment. Persons without extensive training in
welding and cutting methods should not attempt to weld.
The safe working methods are set out in the European standard EN-IEC 62822-1:2018,
entitled: Electric welding equipment - Evaluation of restrictions on human exposure to electromagnetic fields (0 Hz-300
GHz) - Part 1: Product family standard
ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR WORK
MAY ONLY BE CARRIED OUT BY QUALIFIED PERSONNEL.
Although the information contained in this manual reflects the best judgement of the manufacturer, the latter assumes no
responsibility for its use.
Reproduction in whole or in part of this work without the prior written consent of the publisher is prohibited.
The publisher does not accept, and hereby disclaims, any liability to any party for any loss or damage caused by any error
or omission in this manual, whether such error arises from negligence, accident or otherwise.
All rights reserved.
Copyright 2021
Weldkar Welding Equipment
www.weldkar.com
!
TABLE OF CONTENTS
1
Safety Instructions and Warnings
14
2
Performance description
15
3.
Device description
15
3,1
Scope of delivery
16
4
Operation
16
4.1
Putting the device into operation
16
4.2
Cleaning
17
4.3
Polishing
18
4.4
Signing (dark/light)
18/19
5
Maintenance and cleaning
19
5.1
Cleaning and replacing the carbon fibre brush
19/20
5.2
Cleaning and replacing the graphite anode
20
5.3
Maintenance plan
20
6
Transport and storage
20
7
Technical specifications
21
8.
Troubleshooting
21
9
EC Declaration of Conformity
22
10
Instructions for disposal
22
11
Warranty
