7.0 Camera Operation
7.1 Menu
Digital OSD Camera Installation Guide
13
SETUP Menu
LENS (Selection)
SHUTTER (Selection)
WHITE BALANCE Control
BACKLIGHT (Backlight compensation)
AGC (Auto Gain Control)
DNR (Digital Noise Reduction)
SENS-UP (Low Illuminance)
SPECIAL
EXIT
MANUAL
DC
ESC
MANUAL
FLK
ATW
AWC
MANUAL
OFF
LOW
MIDDLE
HIGH
OFF
LOW
MIDDLE
HIGH
OFF
LOW
MIDDLE
HIGH
OFF
AUTO
CAMERA ID
COLOR
SYNC
MOTION DETECTION
PRIVACY
MIRROR
SHARPNESS
RESET
RETURN
When using a C-Mount lens
Please take off the lens protection cap and attach the
C-Mount lens to the camera by screwing it in clockwise.
6.2 Connecting to a Monitor
Please connect the video output terminal located on the back of the camera to the monitor.
6.3 Connecting to Power
Each model has a different power input specification.
Please check the model type and standard power requirement before connecting to power.
Digital OSD Camera Installation Guide
12
When using a CS-Mount lens
Please take off the lens protection cap and C-mount adaptor.
Please attach the CS-Mount lens to the camera by
screwing it in clockwise.
C-mount adaptor
Lens protection cap
C-mount adaptor
C-mount
adaptor
DC Power Type
(DC 12V, 150mA)
DC12V
GND
Dual Power Type
(AC24V 110mA, DC12V 220mA)
DC12V
GND