Digital OSD Camera Installation Guide
10
5.4 Back
Video output t
erminal
Sends video signals and connects to the video input terminal of the monitor.
Setting button
SET button:
Used for the menu display. This button can be used to
confirm settings after changing the value of the selected
function or current conditions.
UP & DOWN buttons:
Used for selecting items by moving the cursor
up or down on the menu screen.
LEFT & RIGHT buttons:
Used when changing item values, by moving
the cursor to the left or right on the menu screen.
Power input terminal
Connects to the power appropriate to each model.
Power lamp
Lights up when the correct power is supplied to the camera.
VIDEO
UP
SET
DOWN
AC24V
RIGHT
LEFT
Please remove the cover of theauto iris lens connection plug
and solder the lens cable to the connector pin in the plug.
6.0 Installation
6.1 Lens
Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used.
When using an auto iris lens
Please peel off about 8mm of the
outer skin of the auto iris lens cable.
Please peel off about 2mm of the outer skin of the
insulated conductor inside the lens cable.
Digital OSD Camera Installation Guide
11
Note
Please keep the lens clean.
Any foreign objects and fingermarks on the lens can cause inferior image quality in low light level conditions.
approx. 2mm
Please replace the auto iris lens connection plug cover
and take off the lens protection cap, and then attach the
auto iris lens to the camera by screwing it in clockwise.
Please insert the connection plug that is connected to the
auto iris lens cable into the auto lens connector,
which is located on the side of the camera.
approx. 8mm
Connector
Lens cable
No.1 Pin
Damping-
No.3 Pin
Drive+
No.2 Pin
No.4 Pin
Drive -