7.3.6 DNR (Digital Noise Reduction)
The background noise in the low light level decreases automatically as the level of gain changes.
Please position the arrow to point to 'DNR' on the SETUP menu by using the UP and DOWN buttons.
Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
OFF :
There is no reduction in noise level.
LOW :
There is a small reduction in noise level with almost no ghost image.
MIDDLE:
The most effective mode. There is a sufficient reduction in noise levels without causing much ghost imaging.
HIGH :
The level of noise is reduced greatly, however there is an increase in ghost imaging.
Digital OSD Camera Installation Guide
20
SETUP
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
ESC
ATW
OFF
LOW
LOW
OFF
Note
When AGC is turned off, DNR does not operate.
SETUP
LENS
SHUTTER
WHITE BAL.
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
MANUAL
ESC
ATW
OFF
LOW
LOW
OFF
7.3.7 SENS-UP (Low Illuminance)
SENS-UP helps maintain a bright, clear screen image by automatically detecting changes in the level of light in low light level
conditions.
Please position the arrow to point to 'SENS UP'
on the SETUP menu by using the UP and DOWN buttons.
Please select the mode you wish to operate by
pressing the LEFT or RIGHT button.
AUTO :
Low light level auto mode.
OFF :
The function does not operate.
Please press the SETUP button when all the settings are complete.
Digital OSD Camera Installation Guide
21
Note
When SHUTTER is in the manual mode, SENS-UP does not operate.
When AGC is turned off, SENS-UP does not operate.
Note
The maximum storage magnification in low light level movement situations can be adjusted
by pressing the SETUP button in 'AUTO' mode.(X2~X128)
As the magnification increases, the screen gets brighter; however the after image also increases.
If storage magnification is increased while SENS UP is operating, it may cause noise,
and spots may appear; however this is normal.