5) When a name has been chosen, please select a position for the name display.
1
Please move the cursor onto 'POS' and then press the SETUP button.
2
The name will appear at the top left hand corner.
3
Please find the position you wish to display
the name by using the 4 directional buttons,
and then press the SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
Digital OSD Camera Installation Guide
24
n o p q r s t u v w x y z
- .
1
CLR
END
2 3 4 5 6 7 8 9
POS
to Locate, then SET
to Locate, then SET
FRONT DOOR
FRONT DOOR
Note
When the AGC is turned off, COLOR does not operate.
When an infrared light is used, there may be a problem with focusing.
Note
When the power frequency is 50Hz, you can not use line-lock mode(NTSC Models).
When the power frequency is 60Hz, you can not use the line-lock mode(PAL Models).
'Sync.' mode is fixed to 'INT' in DC 12V input power.
COLOR
- AUTO:
This camera has a function which automatically changes to theappropriate mode for daytime or night-time.
The COLOR mode isoperated for daytime, and it converts to BW mode for night-time.
- ON :
The color mode is selected by default, and the modes do not change automatically.
SYNC:
Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL LINE-LOCK.
In LINE-LOCK mode, it synchronizes the video signal between cameras without a synchronous generator.
The line-lock synchronization is only used in the areas of 60Hz (NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronization
- LL : External line-lock synchronization
If you choose 'LL', you can adjust the desired phase. Press the SET button.
You can adjust the desired phase from 0 to 359.
Digital OSD Camera Installation Guide
25
SYNC
PHASE
215