Welch Allyn RScribe, User Manual

Page: 79 / 92

SYSTEM SETTINGS
Page | 77
Full Disclosure Tab
This Tab is for the default settings of the full disclosure buffer at the bottom of the acquisition screen.
Speed

Select Speed

Choices: 5, 10, 25, 50 mm/s
Lead Format

Select
Lead Format

Choices: single lead by 3, single lead by 6, or 3 lead
NOTE: Single lead by 3 displays three lines of ECG data in the full disclosure buffer. Single lead by 6
displays six lines of ECG data in the full disclosure buffer. Three lead displays two groups of three leads in
the full disclosure buffer. The amount of data displayed is dependent on the size of the display and the ECG
sweep speed selected.
Single Lead Format - Lead

Select Single Lead Format

Choices: I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
Three Lead Format - Lead 1, 2 or 3

Select
Three Lead Format

Choices: I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
NOTE: The three-lead format requires a lead selection for each of the three leads presented.