Welch Allyn RETeval-DR, Directions For Use Manual

Page: 18 / 60

Number Item Description
4 USB cable Connects the device to a computer or laptop to transfer results.
5 Mains outlet plates Mains outlet plate options that matches available mains outlets.
6 Power brick Connects the device to a mains outlet.
7 Sensor strips Used to test the eye for diabetic retinopathy.
Not shown Dust cover Protects the device from dust while not in use.
Not shown
RETeval-DR Directions for use This document. The Directions for use (DFU) is also available as a
portable document format (.pdf ) file located in the root directory
of the RETeval-DR device when the device is connected to a
computer or laptop via the USB cable.
If any item is missing, contact Welch Allyn Technical Support: www.welchallyn.com/
service . We recommend that you save the shipping box and packing materials in case
you need to store or ship the system.
Docking station
You can place the device in the docking station to charge the device or to connect and
transfer data to a computer or laptop.
Charge the battery
When the RETeval-DR device battery charge is low, a warning message is shown on the
device screen. Return the device to the docking station and let it charge. Do not attempt
to test a patient after this message appears.
The device is powered by an integrated, rechargeable lithium-ion battery. A full charge
permits testing of approximately 70 patients.
The battery icon in the upper-right corner of the screen displays the amount of charge
remaining. The amount of green in the battery icon indicates the remaining capacity.
Note Misalignment of the USB plug and socket can cause damage. The plug and
socket should be visually inspected prior to each installation of the charging
cable. If you see damage, contact Welch Allyn Technical Support:
www.welchallyn.com/service .
14 Setup Welch Allyn
®
RETeval-DR
™