Welch Allyn Hillrom H12+, User Manual

Page: 38 / 51

USING THE RECORDER
34
Ending a Recording Session
At the end of the set recording duration, the time is automatically cleared from the LCD screen and a
“Recording Complete” message is displayed. To proceed:
1. Remove the battery door of the H12+
recorder.
2. Remove battery and dispose of properly.
(Batteries should only be used once.)
3. Gently press down on the SD card to
eject and then remove the SD card.
Ending a Recording Session Early
The recording session can be stopped at any time by performing the following steps:
1. Simultaneously press and hold Up/Right and
Down for a period of 5 seconds. The LCD
screen will prompt you with a “Stop
Recording” message; “No” is set as the
default.
2. Press Up/Right to move the highlight to
“Yes”.
3. Press Enter to stop recording.
4.
A “Recording Complete” message is
displayed.
NOTE: A message is added to the SD card service log indicating that the recording was manually
ended.