Page 18
METHOD 2: USING CHARGING TRANSFORMER
1. Turn AudioScope 3 “OFF”.
2. Plug the charging transformer into a power receptacle of appro-
priate voltage, frequency and plug configuration (see p. 22).
3. Plug the output cord of the charging transformer into
AudioScope 3 charging jack.
4. Place the instrument on its side.
AudioScope 3 will not operate while recharging. A fully drained
battery can be recharged overnight. The instrument can be left
charging indefinitely without damage to instrument or battery. For
longest battery life, use the instrument for at least 20 examinations
before recharging, and vary the number of uses between
recharges.
Method 2
(71040 Charging
Transformer shown)
Step 2b
Step 2c
METHOD 3: USING MICROTYMP
PRINTER/CHARGER
The Printer/Charger for the Welch Allyn MicroTymp (Models 71130,
71135, 71170, 71175) may also be used to charge AudioScope 3.
Follow instructions above for charging stand.
NOTE: The bottom portion of AudioScope 3 handle will become
slightly warm during recharging.
18
