Welch Allyn 35900-NP-TE Directions For Use Manual Download Page 28

Page: 28 / 71

3. Press either the

LEFT

RIGHT

control panel button to change to the desired

interval.

4. Press the

control panel button repeatedly to return to the MAIN menu.

Main menu

The main menu has seven regions. The following screen and table define these regions.

Number

Item

Definition

Number of stored tests

Displays the number of saved tests over the maximum possible tests

Date and time

The day/month, time, and AM/PM

Battery status

Displays the amount of charge remaining or the charging status

when plugged into a mains outlet with the Micro-USB cable

Selected protocol

Displays protocol options: DP 4s (default) and DP 2s on DPOAE

screeners, TE 64s (default) or TE 32s on TEOAE screeners

Start right ear test

Press to start a right ear test

Change protocol and settings

Press to change a protocol or screener settings (see Instrument

Settings for more information)

Start left ear test

Press to start a left ear test

24 Operating instructions

Welch Allyn

OAE Hearing Screener

Summary of Contents for 35900-NP-TE








































































Search results

Summary of Contents for 35900-NP-TE

Reviews:

Related manuals for 35900-NP-TE

Brands by name

Popular brands

Welch Allyn 35900-NP-TE, Directions For Use Manual

Search results

Summary of Contents for 35900-NP-TE

Reviews:

Related manuals for 35900-NP-TE

Brands by name

Popular brands