Welch Allyn 35900-NP-TE Directions For Use Manual Download Page 25

Page: 25 / 71

The message "Add a device" appears on the computer.

5. Select this notice, and then enter PIN

1234.

6. The first time the data manager software is launched, select

Detect Com Port

finalize the screener and computer connection.

7. To cancel the pairing process, press the

CANCEL

control panel button.

The screener returns to the Main menu.

Select a wireless device

When discovery is complete, all discovered devices appear in the order in which they are

found. A compatible thermal printer appears as “ PRT-##-##” (for example, PRT-0a-de).

Other devices appear by their name. These name configurations vary depending on the

device.

1. See "Access menus" for how to access menus.
2. On the WIRELESS DEVICE menu, press either the

LEFT

RIGHT

control panel

button to select the desired device.

3. Press the

PAIR

control panel button to pair the screener with the selected device.

The screen confirms pairing with the message “WIRELESS DEVICE PAIRED” .

4. Press the

MainMenu

control panel button to exit the wireless pairing menu.

5. See “Troubleshooting” in the Maintenance section if wireless pairing is unsuccessful

or if any error messages appear.

Clear test results

The Test Results menu enables you to clear the test results stored in the screener

without printing them.

1. See "Access menus" for how to access menus.
2. Press the

DOWN

control panel button to advance to the TEST RESULTS menu.

3. Press the

LEFT

RIGHT

control panel button to clear the results.

4. Press the

LEFT

RIGHT

control panel button to select Yes or No to clear the

results.

5. Press the

NEXT

control panel button to advance to the next screen without clearing

the results.
After printing results or transferring data to your computer, all tests saved in memory

are marked for deletion and are permanently deleted when a new test is started. It is

not necessary to manually clear these results.

6. Press the

control panel button repeatedly to return to the MAIN menu.

Directions for use

Device overview 21

Summary of Contents for 35900-NP-TE








































































Search results

Summary of Contents for 35900-NP-TE

Reviews:

Related manuals for 35900-NP-TE

Brands by name

Popular brands

Welch Allyn 35900-NP-TE, Directions For Use Manual

Search results

Summary of Contents for 35900-NP-TE

Reviews:

Related manuals for 35900-NP-TE

Brands by name

Popular brands