Welch Allyn 35900-NP-TE Directions For Use Manual Download Page 20

Page: 20 / 71

Attach the probe holder

1. Place the probe holder near the end of the probe cable at the HDMI connector end.

2. Gently press the probe cable into the probe holder close to the point of the probe

head.

Clock settings

Set the date and time before using the screener. The clock should be set prior to testing

because changing the date and time after tests are saved will not change the date on the

printout.

Seasonal time changes, such as Daylight Saving Time, also require resetting the clock.

Note

If the screener is being powered on for the first time or if the battery is
completely discharged and is not charged within approximately one hour,
an

Error! Reference source not found

may appear. If this message

appears, reset the date and time.

Access the clock menu

1. While viewing the MAIN menu, press the

DOWN

control panel button.

The PROTOCOL menu appears.

2. While viewing the PROTOCOL menu, press the

DOWN

control panel button.

The clock menu appears with the current date and time.

16 Setup

Welch Allyn

OAE Hearing Screener

Summary of Contents for 35900-NP-TE








































































Search results

Summary of Contents for 35900-NP-TE

Reviews:

Related manuals for 35900-NP-TE

Brands by name

Popular brands

Welch Allyn 35900-NP-TE, Directions For Use Manual

Search results

Summary of Contents for 35900-NP-TE

Reviews:

Related manuals for 35900-NP-TE

Brands by name

Popular brands