14.
Welcare PureAir Household Air Purifier
Air Quality Sensor
1. Use a soft brush to clean the protective cover of inlet/outlet of
the Air Quality Sensor.
2. Remove the protective cover of the Air Quality Sensor.
3. Use a damp cotton bud to clean inlet/outlet of the Air Quality
Sensor.
4. Dry inlet/outlet of the Air Quality Sensor with a dry cotton bud.
5. Replace the protective cover.
Cleaning the Pre-Filter (ONLY)
• Gently hold onto the groove of both side of the front panel, gently pull outwards to remove.
• Remove the Pre-Filter from the product.
• Use a soft-clean brush or a low powered vacuum cleaner to remove any particles.
• Use water and mild detergent to clean thoroughly.
• Let dry completely and then place back inside product, securely clicking into place.
• Place the front panel back on the product as per instructions (page 10).
Storage
• Wipe away any dirt and dust from the product.
• Store in a safe cool dry place, away from children as per Safety Warnings.
• Ensure the product is always stored in an upright position.
•
DO NOT
place any heavy objects on the product.
• If the product is not going to be used for a long period, turn off and unplug from the
power source.
Air quality sensor
2
3
1
WPA300_Instruction-Manual_A5-working.indd 14
WPA300_Instruction-Manual_A5-working.indd 14
12/8/21 1:26 pm
12/8/21 1:26 pm
