12.
Welcare PureAir Household Air Purifier
Using the Air Purifier
- continued
Speed:
Tap the fan
Speed
Icon
1,2,3 or 4 times to adjust
the air flow. The
BLUE
indicator light will illuminate:
Function:
Anion:
Tap the
Function
icon once to choose the
Anion
function.
The
BLUE
indicator light will illuminate
Anion
.
UV:
Tap the
Function
icon again to choose the
UV
(Ultraviolet
Light) function. The
BLUE
indicator light will illuminate
UV
.
Tap the
Function
icon a third time to choose both the
Anion
and
UV
function. The
BLUE
indicator light will illuminate
Anion
and
UV.
Time:
Tap the
Time
Icon 1,2,3 or 4 times to
adjust timer.
The
BLUE
indicator light will illuminate:
Note:
If no timer is set, the air purifier
will continuously operate until it is
manually switched off.
Reset:
Air Quality Indicator:
Tap the
Reset
icon to turn
Air Quality
indicator
ON/OFF
.
Reset Filter:
After replacing the air filter, tap the Reset button for
at least 5 seconds.
Note:
This function is available after the repalcement of the filters.
Filter Replacement
• The
Reset Button
illuminates and flashes slowly (
RED
when in
Standby
Mode
and
BLUE
when the unit is working) as a reminder to replace the 2 filters (HEPA
13 Filter and Activated Carbon Filter). These filters will need replacing after
approximately 1600 hours of use or up to 1 year.
• The
Photo-Catalyst Filter
needs replacing once every 3 years
ONLY
, or after
approximately 2,000 hours of use, (based on an average use of 8 hours a day - 7
days a week) or if exposed to direct sunlight for more than 2 hours.
WPA300_Instruction-Manual_A5-working.indd 12
WPA300_Instruction-Manual_A5-working.indd 12
12/8/21 1:26 pm
12/8/21 1:26 pm