Instruction Manual & Warranty Information
11.
Replacement Accessories
Replacement accessories can be purchased online or by contacting us directly:
Australia:
1800 807 464
www.welcare.com.au
New Zealand:
0800 523 583 www.jadavey.co.nz
Part Code
Part Name
FIL3001-PRE
Pre-Filter
FIL3001-HP
HEPA (H13) Filter
FIL3001-AC
Activated Carbon Filter
FIL3001-PH
Photocatalyst Filter
AP3001SP-UV
2 pcs UV Lights
Using the Air Purifier
Standby:
Insert the plug of Air Purifier into power source. The buzzer will ring, and all the
indicators will light up and flash twice detecting the air quality automatically.
All indicators will then stop flashing leaving the Air Purifier in
Standby Mode
and the
RED
indicator illuminated.
Power On/Off:
Tap the
Power
icon to switch the air purifier
ON
defaulting to
Auto Mode
.
The
BLUE
indicator light will illuminate.
Tap again to switch the power
OFF
leaving the Air Purifier in
Standby Mode
.
The
RED
indicator light will illuminate
.
Mode:
Auto Mode:
When selecting the
Auto Mode
, the
Air Quality
Indicator
illuminates, slowly flashing
BLUE
,
RED
,
PURPLE
,
GREEN
and
Fan Speed 2
illuminates for 30 seconds while detecting the air
quality of the room. The
Auto Mode
will select the most appropriate
fan speed required.
Silent Mode:
Tap the
Mode
icon to choose
Silent Mode
. The fan speed
will change to level 1 operating at a low noise level.
Night Mode:
A built-in radial sensor will sense the strength of the light in
the room automatically. If the room is dark, all lights of the Air Purifier will be
dimmed and will change to
Silent Mode
.
WPA300_Instruction-Manual_A5-working.indd 11
WPA300_Instruction-Manual_A5-working.indd 11
12/8/21 1:26 pm
12/8/21 1:26 pm
