Instruction Manual & Warranty Information
13.
Filter Replacement
- continued
Note:
t
he air purifier will still work when the
Reset Button
indicator light is flashing.
• Turn off the power from the product and unplug from the power source before
replacing the filters.
• Remove all packing from each of the new filters and dispose of as per instructions.
• Place the filters into the product in the correct order (refer page 10).
• Align and insert the bottom clips into the hollows at the base of the product and
gently push to shut.
• After replacing the air filters, insert the plug back into the power source.
• Press the
Reset Mode
and hold for 5 seconds. The air purifier will then reset.
To ensure a healthy environment, the filters should always be changed when the
product indicates.
Cleaning and Maintenance
• When cleaning, always turn off the power and disconnect from the power source.
• Clean the outside of the product with a damp cloth and mild detergent regularly to
prevent dust to accumulate on the product.
• Use a soft dry cloth to clean the inlet and outlet.
•
DO NOT
put the product in water or any other liquids.
•
DO NOT
use any harsh chemical cleaning agents including bleach or alcohol.
• If the product is being used in an extremely dusty environment, clean more regularly.
•
ONLY
the
Pre-Filter
can be cleaned with water. See following instructions.
The other filters
CANNOT
be cleaned.
WPA300_Instruction-Manual_A5-working.indd 13
WPA300_Instruction-Manual_A5-working.indd 13
12/8/21 1:26 pm
12/8/21 1:26 pm
