Fig. 17
Fig. 18
Fig. 20
Fig. 19
30
Step 3:
Keep the device still and
then press the “Forehead measure-
ment” button
(see
Fig. 19
). A
single acoustic signal indicates that
the measurement has been started.
After approx. 2 seconds, two
acoustic signals confirm that the
measurement has been completed.
The
( )
symbol and the forehead
temperature measured are shown
on the display (e.g. as shown in
Fig. 20
). At the same time, the
backlighting lights up and signals
( )
Step 2:
Hold the device to the
middle of the forehead (see
Fig. 18
)
in such a way that the plug-on
attachment for measuring the
temperature on the forehead
(9)
rests gently on the forehead.
Step 1:
Put the plug-on attachment
for measuring the temperature on
the forehead
(9)
firmly on the
device. Prior to the measurement,
check if the infrared sensor is clean.
Hold the device as shown in
Fig. 17
with your thumb on the
( )
“Fore-
head measurement” button, but do
not press the
( )
button yet.
12.0 Measuring the temperature
on the forehead
TEMPERATURE MEASUREMENT
D
if the temperature measured is
below 99.5 °F
(constant green
light), if there is
elevated
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:40
