23
Step 3:
On the display, the
hour
display flashes
now and you can set the value, depending on the
previously selected time mode, from
1
to
12
or
from
1
to
24
by pressing the
MEM
button and
save the value set by pressing the
SET
button.
Step 2:
By pressing the
MEM
button, you can
select the required
time mode
and save it by
pressing the
SET
button. If the
12-hour display
(
12 hr
) has been set, the
PM
symbol appears on
the display for time displays.
Step 1:
Press the
SET
button and keep it pressed
for approx. 2 seconds in order to access the
setting mode
. The display for the
time mode
(either
12 hr
or
24 hr
) flashes.
9.2 Setting
and
time
date
In the standby mode and in the memory mode,
the device alternately shows
ambient tempera-
ture
(°C or °F),
time
(hours / minutes) in the 24-
hour or 12-hour mode (
PM
) and
date
(month /
weekday). The two flashing points between the
hour and minute display signal intervals of one
second.
9.1 Display of time and date
9.0 Display / setting time and
date
TIME AND DATE
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39
