26
Fig. 10
Fig. 9
Fig. 8
Fig. 7
Fig. 6
In the
standby mode
, hold the
device in order to display the
measured data saved in such a
manner that the rear side of the
device is facing you and press the
MEM
button (see
Fig. 6
). On the
display, the
( )
(memory recall)
symbol appears now and the
number for the measurement saved
last (e.g.
8
, see
Fig. 7
) is shown for
a short period of time. Immediately
afterwards, the
temperature
measured
is shown together with
the symbol for ear measurement
( )
or forehead measurement
( )
(see
Fig. 8
) followed by the
time
(see
Fig. 9
) and the
date
(see
Fig. 10
). Every time the
MEM
button is pressed, first the number
is briefly shown in descending order
followed by the data saved of the
next memory entry. If the oldest
memory entry with number
1
has
The device saves the last 9 body
temperature measurements carried
out in the ear or on the forehead in
the memory, with the current
measurement being shown last in
the memory. If all 9 memory
locations are occupied, the oldest
measurement is deleted from the
memory.
10.0 Memory mode
MEMORY MODE
D
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39
