Welbilt Koolaire KD0270A, Technician'S Handbook, Page: 40 / 136

40 Part Number STH047 Rev01 10/18
Step 11
Use 1/2 of the sanitizer/water solution to
sanitize all removed components. Use a cloth or sponge to
liberally apply the solution to all surfaces of the removed
parts or soak the removed parts in the sanitizer/water
solution. Do not rinse parts after sanitizing.
Step 12 Use 1/2 of the sanitizer/water solution to
sanitize all foodzone surfaces of the ice machine and bin.
Use a cloth or sponge to liberally apply the solution. When
sanitizing, pay particular attention to the following areas:
• Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 13 Replace all removed components.
Step 14
Reapply power and water to the ice machine
and place the toggle switch in the WASH position.
Add the proper amount of Ice Machine Sanitizer to the
water trough.
Model Amount of Sanitizer
KF150 K170 2.2 ounces (66 ml)
KF250 K270 1.9 ounces (57 ml)
Step 15
Wait until the sanitize cycle is complete
(approximately 22 minutes) then place the toggle switch in
the OFF position, disconnect power and water supplies to
the ice machine.
n
Warning
Disconnect electric power to the ice machine at the
electric switch box before proceeding.
Step 16 Repeat step 6 to remove parts for hand
sanitizing.