Welbilt Koolaire KD0270A, Technician'S Handbook, Page: 119 / 136

Part Number STH047 Rev01 10/18 119
KF250/K270 Condenser Fan Motor Access
Access to remove, clean or replace the condenser fan/
motor can be obtained by performing the following:
1. Disconnect electrical power to the ice machine at the
electrical service disconnect.
2. Remove the screws that secure the condenser to the
cabinet and the base to the cabinet.
3. Slide the base forward until contact is made with the
stop screw (approximately 2.5" [6.3 cm]).
,
Caution
Do not move base past the stop screw, tubing damage
could result.
4. Remove right hand screw securing condenser to base.
5. Pivot condenser forward to obtain 5" (12.7 cm)
between the cabinet and condenser shroud. Take care
not to kink refrigeration tubing.
REMOVE THREE
SCREWS AND PULL
BASE FORWARD TO
STOP SCREW.
5" (12.7 CM)
CLEARANCE
AFTER
PIVOTING
CONDENSER
2.5" (6.3 CM) TO
STOP SCREW
REMOVE SCREW AND
PIVOT CONDENSER
TO OBTAIN 5" (12.7
CM) CLEARANCE
BETWEEN CABINET AND
CONDENSER SHROUD.
PT1295A
Accessing the Condenser Fan Motor