background image

NOTICE 

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS FRYMASTER 
DEAN FOOD SERVICE EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART 
PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICE 
CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL 
CONFIGURATION, THIS WARRANTY WILL BE VOID.  FURTHER, FRYMASTER DEAN AND ITS 
AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY 
THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO 
THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN 
UNAUTHORIZED SERVICE CENTER. 

 

NOTICE 

This appliance is intended for professional use only and is to be operated by qualified 
personnel only.  A Frymaster Dean Factory  Authorized Servicer  (FAS) or other qualified 
professional should perform installation, maintenance, and repairs.  Installation, maintenance, 
or repairs by unqualified personnel may void the manufacturer’s warranty.   

 

NOTICE 

This equipment must be installed in accordance with the appropriate national and local codes of 
the country and/or region in which the appliance is installed.   

 

NOTICE TO OWNERS OF UNITS EQUIPPED WITH COMPUTERS 

 

U.S. 

This device complies with Part 15 of the FCC rules.  Operation is subject to the following two 
conditions:  1) This device may not cause harmful interference, and 2) This device must accept 
any interference received, including interference that may cause undesired operation.  While 
this device is a verified Class A device, it has been shown to meet the Class B limits. 
 

CANADA 

This digital apparatus does not exceed the Class A or B limits for radio noise emissions as set 
out by the ICES-003 standard of the Canadian Department of Communications. 

Cet appareil numerique n’emet pas de bruits radioelectriques depassany les limites de classe A 
et B prescrites dans la norme NMB-003 edictee par le Ministre des Communcations du Canada. 

 

 DANGER 

Prior to movement, testing, maintenance and any repair on your Frymaster fryer, disconnect 
ALL electrical power from the fryer.     

 

NOTICE

 

The instructions in this manual for using a bulk oil system for filling and discarding oil are for a 
Frontline or RTI systems.  These instructions may not be applicable to other bulk oil systems.

 

 

 

 

Summary of Contents for Frymaster YUM WINGSTREET K3000

















Reviews: