background image

1-7

 

1.6   Disposing 

 

Left Display 

 

Right Display

 

Action 

 

READY 

or 

OFF READY 

or 

OFF

 

Press the filter button until Filter is displayed. 

WAITING 

Blank

 

None required.   

Filter Now?  

yes/no 

Press silver (green if four lane) 

 (NO) button. 

Dispose now? 

Yes   NO 

Remove the filter pan and insert a METAL pan beneath the drain.  Once 
the pan is positioned under the drain press red 

 

(YES) button. (Press 

silver (green if four lane) 

 NO button to cancel function.) 

OPEN DRAIN VALVE 

Blank

 

Open the drain valve. 

DISPOSING 

Blank

 

None required. 

VAT EMPTY? 

CONFIRM 

Press red 

 

CONFIRM button once the vat is empty. 

CLOSE DRAIN VALVE 

Blank

 

Close drain valve and press red 

 

CONFIRM button.   

INSERT PAN 

CONFIRM 

Remove the METAL pan and insert the filter pan and press red 

 

CONFIRM button. 

FILL VAT WITH OIL 

Confirm 

Fill vat with oil to the bottom fill line and press red 

 

CONFIRM button 

when full. 

off off 

  

 

1.7   Polishing 

 

The polish is activated after the controller has been off for six or more hours.  A polish can be manually started anytime 
by pressing and holding the yellow and blue lane buttons simultaneously.  A polish will not be called for if the controller 
has been off for less than six hours since the last polish. 

Left Display 

Right Display 

Action 

Polish Now? 

Yes    NO 

Respond to prompt with button push. Press YES or NO. YES starts a 
polish, detailed below. NO delays a polish up to two hours and cooking 
continues. At the next prompt, NO again delays the polish a second two 
hours (for a total maximum delay of four hours).  At the next prompt a 
polish must be completed to continue cooking. 

OPEN DRAIN VALVE 

 

Open the drain valve. 

Draining 

 

None required. The oil drains from the frypot to the filter pan. 

TURN PUMP ON 

 

Turn the pump on. 

POLISHING 

30-MINUTE COUNTDOWN 

TIMER 

None required.  The oil flows from the filter pan to the frypot and back to 
the filter pan for 30 minutes. 

Close drain valve 

 

Close the drain valve. 

FILLING 

 

None required. The oil returns from the filter pan to the frypot. 

TURN PUMP OFF WHEN FULL 

and press confirm 

CONFIRM 

Turn the filter pump off and press red 

 

CONFIRM button. 

OFF OFF 

 

Summary of Contents for Frymaster YUM WINGSTREET K3000

















Reviews: