7.
Wait for the wash cycle to finish (about 30 to 60 minutes
depending on the cleaning profile).
If the 'Express' cleaning program has been selected in the
cleaning profile, skip steps 8 to 12 of these instructions.
8.
■
An audible signal is given when the wash cycle is finish‐
ed.
■
You are prompted to add the rinse aid.
■
The software displays for you the number of single-
measure dispensing bottles required.
In exceptional cases, you may be able to skip this step of
adding rinse aid depending on the water hardness and
the amount of limescale in the appliance.
9.
Open the appliance door.
10.
Add the rinse aid from the single-measure dispensing bot‐
tles to the cooking chamber.
11.
Close the appliance door.
12.
Wait for the final wash cycle to finish (about 20 to 30 mi‐
nutes depending on the cleaning profile).
13.
■
An audible signal is given when the final wash cycle is
finished.
■
Follow the prompts displayed by the software.
14.
■
Open the appliance door and check the cleaning result.
The cooking chamber should look clean and not smell
of leftover food or cleaning agents.
■
Check the cooking chamber for any foreign matter that
may have entered with the rinse water. Remove any
foreign matter.
■
If the cleaning result is not good enough, either clean
and rinse the cooking chamber manually or run a clean‐
ing profile again.
15.
Leave the appliance door ajar to let the cooking chamber
dry out.
5 Cleaning procedures
User manual
64
