Weka Holzbau 593.3131 Series, Assembly, User And Maintenance Instructions

Page: 58 / 72

Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.

Copyright HRB 3662
57
- GB -
7. User and maintenance instructions
When using/inspecting the pool, only the existing ladder at the plant room or the pool stairs available as
accessories are to be used.
When using the portable ladders, ensure that they have a secure footing.
Max. water filling level: 1.00 m
If you have any questions, contact the manufacturer:
weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel.: (0049) 395 429080
Fax: (0049) 395 45129819
Care and maintenance
The corner connections are hot-dip galvanised and, as a rule, require no further protection.
Zinc coatings have a so-called ‘self-healing’ effect and thus even out minor scratches and cuts in the
galvanised material.
However, should the material show the first signs of rust, due to the manufacturing, storage, transport and
installation process, we recommend the use of a high-quality zinc spray. Please consult with a specialist
company.
7.1. Water treatment
General
Working with chemicals
The following points are to be noted in order to guarantee safe contact with out products:
The various chemicals should never be mixed in concentrated form. Use only appropriate containers for pre-
mixing with water.
Always add the chemicals to the water, never the reverse.
All chemicals should be stored dry and cool in their original packaging.
Follow the application instructions on the packaging.
All chemicals are to be stored out of the reach of children and unauthorised persons.
Our packaging is 100% recyclable.
TC = Toxic classification 4 + 5: Observe warnings on the packages.
Useful information, suggestions
 If the pool is very dirty, bottom suction cleaners are available. This reduces the load on filter systems and
protects the environment.
The pH value:
The most important factor in maintaining clean swimming pool water is the pH value. It influences all aspects
of the pool water. The first step is always: Check the pH value (pH/chlorine or pH/oxygen sampling device)!
The ideal range is between 7.0 and 7.4
. If the pH value is too high, this can lead to skin and eye irritations.
It may also render other maintenance measures ineffective. If the pH value is too low, this can cause
corrosion of your fittings.
For better distribution, pH regulator (accessory) is added near the inflow or at several points around the
swimming pool (
not in front
of the filter).