Pick-O-Mat • PM1100 / PM1500 • R02-2014
7/44
Introduction
1.7 Warranty and liability
1
1.6.2
Explanation of safety instructions in this manual
This manual contains instructions that you should observe for your personal safety and to
avoid material damage.
Safety instructions for your personal safety are highlighted by a sign containing a warning
triangle and signal word. The associated text describes the hazard involved, avoidance
options and the consequences which may result from failure to observe the safety
instruction.
General instructions or instructions relating to possible material damage are highlighted
by a sign without a warning triangle.
They are, depending on the degree of risk involved, illustrated as follows:
1.6.3
Legend
Symbols and abbreviations with the following meaning are used in this manual to make
its content more clear:
1. Indicates a numbered list.
a) Indicates the second level of a numbered list.
•
Indicates a list.
`
Indicates the second level of a list.
The book symbol before a section of text indicates further applicable documents.
L
The information symbol before a section of text indicates an additional note or an
important tip for use.
1.6.4
Figures
The figures shown are examples. There may be differences between the illustrations and
the actual delivery.
1.6.5
Directory of valid pages
Pages of this manual including the title page: 44
1.7
Warranty and liability
The machine is covered by a guarantee of 24 months from the date of delivery without
shift limitations.
DANGER
A warning triangle with the signal word DANGER
indicates an immediate hazardous situation, which, if
not avoided, will lead to fatalities or severe injuries.
WARNING
A warning triangle with the signal word WARNING
indicates a potential hazardous situation, which, if not
avoided, can lead to fatalities or severe injuries.
CAUTION
A warning triangle with the signal word CAUTION
indicates a potential hazardous situation, which, if not
avoided, can lead to light or medium injuries.
NOTICE
A sign with the signal word NOTICE indicates
potential material damage or provides additional
information, which should be observed when
operating the machine.
