Pick-O-Mat • PM1100 / PM1500 • R02-2014
29/44
Commissioning
6.2 Initial commissioning
6
6.2.4
Adjusting the press module
The press module can be adjusted radially.
1. Loosen the fastening screws in the cast foot of the press module.
2. Turn the press module radially within the T-slot field so that the holder middle is
always aligned towards the machine's middle.
3. Tighten fastening screws.
The lift position can be adjusted radially on the PM1500 press module.
1. Loosen the counternuts on the threaded rod.
2. Adjust the stroke position turning the threaded rod.
3. Tighten counternuts.
Fig. 14: Adjusting the press module
(1) Four fastening screws
(2) Threaded rod
Lift dependencies
Vertical stroke of the handling
module
PM1100
PM1500
30.0 mm
≥
40 mm
30.0 mm
≥
40 mm
Stroke of the press module
40.5 mm
49.5 mm
41.5 mm
50.05 mm
Bottom position (dimension A)*
79.3 mm
75.0 mm
75-95 mm** 75-95 mm**
*
Dimension, see catalogue
**
The lift position can be set using a threaded rod.
PM1500
1
2
