Pick-O-Mat • PM1100 / PM1500 • R02-2014
28/44
Commissioning
6.2 Initial commissioning
6
6.2.3
Adjusting the lift module
The lift module can be adjusted radially.
1. Loosen the clamps.
2. Loosen the fastening screws in the cast foot of the lift module.
3. Turn the lift module radially within the T-slot field so that the holder middle is always
aligned towards the machine's middle.
4. Tighten fastening screws.
5. Tighten the clamp's screw.
Fig. 13: Adjusting the lift module
(1) Four fastening screws
(2) Clamp
Lift dependencies
Vertical stroke of the handling
module
PM1100
PM1500
30.0 mm
≥
40 mm
30.0 mm
≥
40 mm
Stroke of the lift module
58.3 mm
70.0 mm
58.3 mm
70.0 mm
Bottom position (dimension A)*
100.0 mm
94.0 mm
100.0 mm
94.0 mm
*
Dimension, see catalogue
PM1100
PM1500
1
2
1
2
