OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER
Page
28
Date: 03/10
Mac OSX:
Configure the DAC202 via the “Audio MIDI Setup”
(Applications > Utilities) and the “WeissFirewire Control
Panel” (Applications). Note that most settings
controllable from the control panel are available only in
firewire mode.
Global Settings / Bus:
Master:
Is the device which is sync master on the virtual
bus in case multiple devices (“DAC202s”) are connected.
Sync Source:
The clock to which the DAC202 should sync
to. Usually this is the DAC202’s internal clock generator.
Sampling Rate:
The sampling rate of the device when
internally clocked. When clocked/synching to one of the
other interfaces (XLR, RCA, TOS) the sampling rate
indicated reflects the one fed from the external device.
Operation Mode:
determines the stability of the system.
Try other modes if there are clicks in the music.
Note that when using the XLR, RCA or TOS in-puts there
is no need to hook up a computer to the DAC202.
Global Settings / Info:
Information about the driver version.
Device Settings / General:
The device settings should be pretty self explana-tory.
Device Settings / Firmware Loader:
Allows to upload new firmware to the DAC202. Not used
for normal operation.
